Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

To reset the service light on the Smart ForTwo 451.

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

In this new guide dedicated to your Smart ForTwo 451 (year 2007-2015), we will discover how to manually reset the service light that continues to stay on continuously on the car's instrument panel. First, go inside the cabin and reach the driver's seat. At this point, make sure the instrument panel is turned off, then locate the button located on the lower left side of the panel and hold it down. Simultaneously, turn on the instrument panel and wait for about 10 seconds. Finally, release the button and the reset is successfully completed.

Posted on 25 October 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light of the Smart ForTwo 451
How to reset the service light of the Smart ForTwo 451
Smart (2007-2015 / 451) In the following guide dedicated to your Smart ForTwo 451 (2007-2015) we will give you all the necessary information so that you can manually reset t…
Resetting the service light on the Smart Fortwo.
Resetting the service light on the Smart Fortwo.
Smart (2007-2015 / 451) Let's discover step by step instructions on how to reset the service indicator for regular maintenance of the Smart Fortwo's engine oil change. First…
How do I replace the cabin filter in the Smart Fortwo 450?
How do I replace the cabin filter in the Smart Fortwo 450?
Smart (2007-2015 / 451) The replacement of the cabin filter of the Smart Fortwo 451 takes about 20 minutes of work. The filter is located inside the passenger compartment, n…

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos