Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : Replacement of speakers on Smart 454.

Smart - Video tutorial

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Loudspeaker
Operation: Replacement of speakers on Smart 454.

In this very useful tutorial, we are shown how to replace the front speakers on a Smart 454. For the replacement, we will not need any special tools, we will only need to have a small lever, preferably made of plastic, and a screwdriver on hand. Let's start by taking our lever and removing, by running it along the edges and applying pressure, the speaker cover and then removing the underlying cover in the same way. Once this is done, we take the screwdriver and remove the speaker's fixing screws, then disconnect and completely remove it. Finally, we install a new speaker by following the reverse procedure.


Posted on 27 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Smart 2007-2015 - How do you disassemble the Smart's speakers? Read Answer
    • Smart 2007-2015 - How to disassemble the Smart Fortwo speakers? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos