Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Alto
    4. : Timing belt

Suzuki Alto - Timing belt

Suzuki Alto (2004-2009 / Ha24)
How do you replace the timing belt on the Suzuki Alto?
Replacing the timing belt on the Suzuki Alto is done by opening the bonnet, so that the plastic cover located on the left side of the engine block can be …read all…
Posted on 2 April 2023 by ScegliAuto
Suzuki Alto (2008-2014 / MK 7)
How to replace the timing belt on Suzuki Alto?
In order to replace the timing belt of the Suzuki Alto you have to go to open the hood and then you will have to unscrew the screws that fix the grille in the …read all…
Posted on 25 May 2022 by ScegliAuto
Suzuki Alto (2008-2014 / MK 7)
When and how to change the timing belt on Suzuki Alto 1.0 Petrol
In this video tutorial we will see how to disassemble and replace the timing belt on a Suzuki Alto 1.0 Petrol, following the instructions below. The timing …read all…
Posted on 28 January 2024 by ScegliAuto
Suzuki Alto ( 200-2015 / )
How to mount the timing belt on Suzuki Alto
Let's get ready to replace the timing belt on Suzuki Alto: lift the car on a column bridge or jack (if necessary, remove the front wheel, with a screwdriver …read all…
Posted on 30 October 2023 by ScegliAuto
Car stereo (2) Battery (1) Gearbox (1) Spark plugs (1) Key (1) Timing belt (4) Headlight (1) Air filter (1) Cabin air filter (3) Clutch (1) Side turn signal light bulb (1) Headlight bulb (4) License plate light (1) Front bumper (1) Rear bumper (1) Brake pads (1) Instrument cluster (2) Fuse box (7) Outside rearview mirror (1)

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos