Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Suzuki Alto?

Model: Suzuki Alto Ha24 - Years 2004-2009
Part: Timing belt

To replace the timing belt on a Suzuki Alto, open the bonnet to detach the plastic cover located on the left side of the engine block. You will also need to lift the car with a jack or ramp to loosen the bolts securing the front right wheel. Once this is removed, you can detach the inner cover of the wheel arch, allowing access to loosen all the central nuts of the pulleys around which the belt is situated. You can now replace it with a new one, refitting all the components removed earlier.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

When and How to Change the Timing Belt on Suzuki Alto 1.0 Petrol
When and How to Change the Timing Belt on Suzuki Alto 1.0 Petrol
Suzuki Alto (2008-2014 / MK 7) In this video tutorial, you will learn how to remove and replace the timing belt on a Suzuki Alto 1.0 Petrol, following the instructions below. The t…
How to replace the timing belt of the Suzuki Alto?
How to replace the timing belt of the Suzuki Alto?
Suzuki Alto (2008-2014 / MK 7) To replace the timing belt of the Suzuki Alto, open the bonnet and then unscrew the screws securing the grille at the front of the bumper. Removing t…
How to Fit the Timing Belt on a Suzuki Alto
How to Fit the Timing Belt on a Suzuki Alto
Suzuki Alto ( 200-2015 / ) Prepare to replace the timing belt on a Suzuki Alto: lift the car on a column lift or jack (if necessary, remove the front wheel and the right wheel …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos