Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Suzuki Alto?

Model: Suzuki Alto MK 7 - Years 2008-2014
Part: Timing belt

To replace the timing belt of the Suzuki Alto, open the bonnet and then unscrew the screws securing the grille at the front of the bumper. Removing this piece will provide easier access to the left side of the engine block, where the timing belt is located. By unscrewing the central pins of the pulleys, you can reduce the tension of the belt, remove it, and replace it with a new spare part. This operation should be performed every 75,000 miles; after replacement, remount all previously removed components.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

When and How to Change the Timing Belt on Suzuki Alto 1.0 Petrol
When and How to Change the Timing Belt on Suzuki Alto 1.0 Petrol
Suzuki Alto (2008-2014 / MK 7) In this video tutorial, you will learn how to remove and replace the timing belt on a Suzuki Alto 1.0 Petrol, following the instructions below. The t…
How to Fit the Timing Belt on a Suzuki Alto
How to Fit the Timing Belt on a Suzuki Alto
Suzuki Alto ( 200-2015 / ) Prepare to replace the timing belt on a Suzuki Alto: lift the car on a column lift or jack (if necessary, remove the front wheel and the right wheel …
How to Replace the Timing Belt on a Suzuki Alto?
How to Replace the Timing Belt on a Suzuki Alto?
Suzuki Alto (2004-2009 / Ha24) To replace the timing belt on a Suzuki Alto, open the bonnet to detach the plastic cover located on the left side of the engine block. You will also …

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos