Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the engine oil of the Suzuki Access 125, you need to unscrew the drain plug located in the central lower part of the vehicle: once this is loosened, you can let all the old oil flow into a properly positioned container. Once the oil has drained out, you can remove the old filter from its housing in order to insert the new replacement piece. After the replacement is complete, you will need to top up the oil so that you can pour in the new oil through the breather on the right side of the motorcycle.

Posted on 10 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you change the engine oil of the Suzuki Access 125?
How do you change the engine oil of the Suzuki Access 125?
Access 125 The engine oil present in the lubrication system of the Suzuki Access 125 can be replaced by loosening the drain plug located at the central lower pa…
How to replace the engine oil in the Suzuki Access 125 scooter?
How to replace the engine oil in the Suzuki Access 125 scooter?
Access 125 In this tutorial, we can see how to replace the engine oil in the Suzuki Access 125 scooter, an extremely simple and quick operation. First of all, m…
How to replace the engine oil in the Suzuki Access 125 scooter?
How to replace the engine oil in the Suzuki Access 125 scooter?
Access 125 In this tutorial we can see how to replace the engine oil in the Suzuki Access 125 scooter, a very simple and quick operation. First of all, make sur…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos