Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the exhaust installed on the Suzuki V-Strom 650 XT by loosening the screws that fix this terminal to the appropriate supports on the right side of the motorcycle near the rear wheel: once the old exhaust has been removed, it will be possible to proceed by placing the new one in its place. The new exhaust must now be connected to the supports so that it can be then joined to the exhaust manifold using the connecting clamp: after installation, it will be possible to verify that everything is working correctly.

Posted on 15 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the brake pads on the Suzuki V-Strom 650?
How do you replace the brake pads on the Suzuki V-Strom 650?
V Strom 650 The brake pads on the Suzuki V-Strom 650 can be replaced by performing the same operation for both the front and rear brakes: you will need to start …
How do you replace the levers of the Suzuki V-Strom 650?
How do you replace the levers of the Suzuki V-Strom 650?
V Strom 650 To replace the levers of the Suzuki V-Strom 650, you need to loosen the screws that secure them to their housing on the sides of the handlebars: once…
How do you replace the engine oil of the Suzuki V-Strom 650?
How do you replace the engine oil of the Suzuki V-Strom 650?
V Strom 650 To replace the engine oil of the Suzuki V-Strom 650, you need to loosen the drain plug of the oil pan located in the central lower part of the vehicl…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos