Do it yourself
Frequently asked questions about cars and motorcycles
How to replace oil and engine filter on a Suzuki Burgman 125? Follow this guide. Position the scooter on its original stand, then use a socket to unscrew the bolt from the oil sump (drain the fluid into a container). Unscrew the screws securing the cap where the oil filter is located. Remove the used oil filter kit and place a new one after cleaning (check the gasket around the metal cap). Finally, top up the new fluid in the engine and close with the plastic cap.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Burgman 125 In this tutorial, see how to change the engine oil in a Suzuki Burgman 125 scooter, a very simple and quick operation to perform every 12 months. Fir…
Burgman 125 In this tutorial, you will see how to change the engine oil on a Suzuki Burgman 125 scooter, an extremely simple and quick operation. First, wait unt…
Burgman 125 To change the engine oil of the Suzuki Burgman 125, loosen the cap located at the bottom of the bike so that all the used oil can drain out. This oil…

How to Reset the Service on the Husqvarna FE 350?

In this tutorial, you will see how to reset the service on the Husqvarna FE 350, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine. Then, repeatedly press the button located to the right of the display until you reach the odometer reading "ODO". Once done, press and hold the opposite button for about 5 seconds, and when the screen changes, press the right button again.

Watch the video!


by ScegliAuto

More videos