Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Access 125
Part: Engine

To disassemble the engine of the Suzuki Access 125, you need to loosen the screws that secure the valve cover and the cylinder to the top of the engine; once all these components have been removed, it will be possible to locate the piston inside. This piston can now be detached from the connecting rod by removing the pin and the corresponding ring; then, you will need to access the crankshaft, and also replace all the other necessary components. Finally, it will be possible to reassemble the engine block, ensuring that everything functions properly.

Posted on 14 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Suzuki Access
How to Replace the Front Headlight Bulb on a Suzuki Access
Access 125 If you own a Suzuki Access 125 and want to learn how to correctly replace the front indicator bulb, just follow these steps. Start by unscrewing all …
How to Replace the Battery in a Suzuki Access 125 Scooter?
How to Replace the Battery in a Suzuki Access 125 Scooter?
Access 125 In this tutorial, you will see how to replace the battery in a Suzuki Access 125 scooter, a very simple and quick operation. First, ensure that the k…
How to Replace the Front Headlight Bulb on a Suzuki Access 125 Scooter?
How to Replace the Front Headlight Bulb on a Suzuki Access 125 Scooter?
Access 125 In this tutorial, you will learn how to replace the front headlight bulb on a Suzuki Access 125 scooter. This operation is extremely simple and quick…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos