Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the rear brake pads on the Suzuki Boulevard M109R, you need to loosen the screws that secure the caliper to its housing, located at the top of the brake disc: once the screws are loosened, you can detach the caliper and also remove the pin that holds the pads in place. At this point, you can position the new pads inside the caliper and then secure it onto the disc: after the caliper mounting screws are in place, you can check that everything functions correctly.

Posted on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Suzuki Boulevard M109R?
How to Change the Engine Oil in a Suzuki Boulevard M109R?
Boulevard In this tutorial, you will see how to change the engine oil in a Suzuki Boulevard M109R, a very simple and quick operation. First, ensure that the en…
How to Replace the Front Brake Pads on a Suzuki Boulevard?
How to Replace the Front Brake Pads on a Suzuki Boulevard?
Boulevard To replace the front brake pads on a Suzuki Boulevard, loosen the bolts securing the brake caliper to the corresponding disc: once the securing bolts…
How do you replace the motor oil of the Suzuki Boulevard?
How do you replace the motor oil of the Suzuki Boulevard?
Boulevard In order to replace the motor oil of the Suzuki Boulevard, you need to loosen the drain plug of the oil pan, located in the central lower part of the…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos