Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Starting the Suzuki Burgman scooter is a simple and quick operation. Before starting the engine, it is important to turn on the instrument cluster; insert the key into the ignition switch, turn on the instrument cluster, and press the red button located on the right side of the handlebars. Once the button is pressed, the engine will start, and you can head out on the road. To turn off the scooter, press the red button and turn the key counterclockwise in the ignition switch, then remove it. If it fails to start, you may need to check the battery or the starter motor.

Posted on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight and Bulb on the Suzuki Burgman 125
How to Replace the Front Headlight and Bulb on the Suzuki Burgman 125
Burgman 125 Below are the instructions for removing and replacing the front headlight and bulb on the Suzuki Burgman 125 scooter. First, place the scooter on its…
How to Replace the Spark Plug on the Suzuki Burgman 125
How to Replace the Spark Plug on the Suzuki Burgman 125
Burgman 125 Today, we will look at the instructions for removing and replacing the spark plug on the Suzuki Burgman 125 scooter. First, place the scooter on the …
How to Replace Oil and Engine Filter on a Suzuki Burgman 125
How to Replace Oil and Engine Filter on a Suzuki Burgman 125
Burgman 125 How to replace oil and engine filter on a Suzuki Burgman 125? Follow this guide. Position the scooter on its original stand, then use a socket to uns…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos