Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief guide, we will see the instructions that will allow us to perform the routine maintenance service, replacing the engine oil and oil filter on the Suzuki GSF Bandit 650 motorcycle. First, place the motorcycle on the centre stand and begin unscrewing the oil drain bolt found on the sump, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge with the appropriate tool, replacing it with the new one (screw it on gently). Finally, unscrew the filler cap to top up with the new engine oil!

Posted on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Suzuki GSF 650
How to Change the Engine Oil and Oil Filter on a Suzuki GSF 650
Gsf Bandit 650 Let’s discover how to perform the routine maintenance oil change on the Suzuki GSF 650 Bandit. First, unscrew and remove the oil drain bolt located u…
Replacement of the clutch discs of the Suzuki GSF 650 Bandit
Replacement of the clutch discs of the Suzuki GSF 650 Bandit
Gsf Bandit 650 Let's see the information that will allow us to disassemble and replace the clutch discs of the Suzuki GSF 650 Bandit. First, we put the motorcycle o…
Guide to disassembling the clutch of the Suzuki GSF Bandit 650
Guide to disassembling the clutch of the Suzuki GSF Bandit 650
Gsf Bandit 650 In a few simple steps, we will see the instructions that will allow us to disassemble and replace the clutch discs of the Suzuki GSF Bandit 600 motor…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos