Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Access 125
Part: Battery

In this tutorial, you will see how to replace the battery in a Suzuki Access 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety, then remove the front cover by unscrewing both the two screws located on the upper inner side of the fairing and the two located on the lower edge, above the wheel. Next, disconnect the two power terminals starting with the negative, unclip the strap, and remove the old battery from its housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Posted on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery in the Suzuki Access 125 scooter?
How to replace the battery in the Suzuki Access 125 scooter?
Access 125 In this tutorial we can see how to replace the battery in the Suzuki Access 125 scooter, an extremely simple and quick operation. First of all, make …
How to replace the engine oil in the Suzuki Access 125 scooter?
How to replace the engine oil in the Suzuki Access 125 scooter?
Access 125 In this tutorial, we can see how to replace the engine oil in the Suzuki Access 125 scooter, an extremely simple and quick operation. First of all, m…
How to set the time on the Suzuki Access 125 scooter?
How to set the time on the Suzuki Access 125 scooter?
Access 125 In this tutorial, you will see how to set the time on the Suzuki Access 125 scooter, an extremely simple and quick operation, to be done, for example…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos