Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the front headlamp bulb in a Suzuki Boulevard C90T, a very simple and quick operation. First, ensure that the ignition is off for safety, then unscrew the two side bolts of the headlamp using a 4mm hex key, release the two indicated lower clips, and remove the chrome ring. Next, unscrew the two additional screws just freed, separate the headlamp from the base, remove the rubber cap, and disconnect the power connector. At this point, simply release the metal clip, replace the bulb, and reassemble everything by following the reverse procedure.

Posted on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs on the Suzuki Boulevard?
How to replace the front headlight bulbs on the Suzuki Boulevard?
Boulevard In this tutorial we can see how to replace the front headlight bulbs in the Suzuki Boulevard, an extremely simple and fast operation. First of all, m…
How to Replace the Front Brake Pads on a Suzuki Boulevard?
How to Replace the Front Brake Pads on a Suzuki Boulevard?
Boulevard To replace the front brake pads on a Suzuki Boulevard, loosen the bolts securing the brake caliper to the corresponding disc: once the securing bolts…
How do you replace the exhaust pipe of the Suzuki Boulevard C50T?
How do you replace the exhaust pipe of the Suzuki Boulevard C50T?
Boulevard In order to replace the exhaust pipe of the Suzuki Boulevard C50T, you need to loosen the screws that fix the exhaust terminal to its housing on the …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos