Do it yourself
Frequently asked questions about cars and motorcycles

Suzuki GSXR 600 Service

Model: Suzuki Gsxr 600
Part: Engine oil

Video tutorial

Start the engine for a few minutes to make the oil more fluid. Remove the fairing to create more working space.

Unscrew the upper fill cap and the lower drain cap of the engine oil compartment. Open both holes to prevent a vacuum, thus speeding up the draining process.

Collect the used oil in a container, and if the lower cap appears too dirty, replace it. Unscrew the filter with the appropriate socket wrench and install the new one. Tighten it. Close the engine oil drain hole and add new lubricant through the upper hole.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Gsxr 600 Before you begin, it is advisable to position your Suzuki GSXR 600 vertically for easier access to the seat. Start by removing the side covers around…
Gsxr 600 Before you can start, sit on the seat of your Suzuki GSXR 600. Begin by inserting the key into the ignition switch and turning it clockwise. Next, pu…
Gsxr 600 To change the engine oil on the Suzuki GSXR 600, loosen the drain plug located at the bottom centre of the vehicle: once this is unscrewed, you can c…

How to Change the Engine Oil in the Yamaha MT-15?

In this tutorial, you will learn how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, ensure that the engine is cool enough. Then, position a container beneath the motorcycle, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out. Next, open the filter cap and insert the replacement. Finally, reassemble everything and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos