Do it yourself
Frequently asked questions about cars and motorcycles

How to start a Suzuki GSXR 600

Model: Suzuki Gsxr 600
Part: Checks and maintenance

Video tutorial

Before you can start, sit on the seat of your Suzuki GSXR 600. Begin by inserting the key into the ignition switch and turning it clockwise. Next, pull and hold the clutch lever, while pressing and holding the start button located below the throttle grip.

Keep it pressed until the engine starts. Once the engine of your Suzuki GSXR 600 is running, you can release the start button and the clutch lever, and the procedure is complete.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Gsxr 600 Before you begin, it is advisable to position your Suzuki GSXR 600 vertically for easier access to the seat. Start by removing the side covers around…
Gsxr 600 In this tutorial we can see how to replace the engine oil in the Suzuki GSXR 600, an extremely simple and quick operation. First of all, we wait for …
Gsxr 600 To change the engine oil on the Suzuki GSXR 600, loosen the drain plug located at the bottom centre of the vehicle: once this is unscrewed, you can c…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos