Changing Brake Pads on Suzuki GSRX 600

Model: Suzuki Gsxr 600
Part: Brake pads

This video is currently unavailable

Start with the rear wheel. Unscrew the outer bolts of the brake caliper, lift it, and remove the brake pads.

While you're at it, it's advisable to clean the entire braking area thoroughly. Use a tool to apply pressure and slightly open the brake pistons, as the new pads will obviously be thicker than the old, worn ones.

Insert the new pads and close the caliper by refitting the previously removed bolts. Follow the same procedure for the front wheel to carry out this simple but essential maintenance.

Updated on 2 April 2026 by ScegliAuto

Related tutorials

How to Replace the Rear Brake Pads on a Suzuki GSXR 600

Gsxr 600 To replace the brake pads on a Suzuki GSXR 600, you need to loosen the bolts that secure the brake caliper to the rear wheel disc. Once the caliper i…

Replacing the Rear Brake Pads on a Suzuki GSX-R 600 K7

Gsxr 600 In this video, you will see how to disassemble and replace the rear brake pads on a Suzuki GSX-R 600 K7, following these simple steps. First, loosen …

Replace the front brake pads on a Suzuki GSX-R 600 (2012)

Gsxr 600 In this video, see how to disassemble and replace the front brake pads on the 2012 Suzuki GSX-R 600. First, remove the front brake calipers; to do th…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!

by ScegliAuto

Changing Brake Pads on Suzuki GSRX 600

Related tutorials

How to replace the drive belt on the Yamaha Xmax 300

More videos