Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, see how to disassemble and replace the front brake pads on the 2012 Suzuki GSX-R 600. First, remove the front brake calipers; to do this, unscrew the two fixing screws of the caliper using a socket spanner, as shown in the video. At this point, remove the caliper from the disc and extract the old pads inside it by pushing back the piston; this will facilitate the insertion of the new pads. Now clean the caliper of carbon residue and fit the new brake pads!

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on a Suzuki GSX-R 600 K7
Replacing the Rear Brake Pads on a Suzuki GSX-R 600 K7
Gsxr 600 In this video, you will see how to disassemble and replace the rear brake pads on a Suzuki GSX-R 600 K7, following these simple steps. First, loosen …
How to remove the wheels from the Suzuki GSX-R 600
How to remove the wheels from the Suzuki GSX-R 600
Gsxr 600 This guide provides instructions on how to remove the front and rear wheels of the Suzuki GSX-R 600 in simple steps. First, place the paddock stands …
How to Replace the Battery of the Suzuki GSX-R 600
How to Replace the Battery of the Suzuki GSX-R 600
Gsxr 600 Replacing the battery of the Suzuki GSX-R 600, as well as the GSX-R 750, is a task that takes just a few minutes and a simple socket spanner. First, …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos