Do it yourself
Frequently asked questions about cars and motorcycles
Today, in this video tutorial, learn how to disassemble and replace the brake pads on the Suzuki GSX-R 600 motorcycle, following the instructions below. First, unscrew the bolts securing the brake caliper to remove it from the disc; then apply pressure to the caliper piston to retract it, thus removing the old pads, as illustrated in the video. At this point, clean the caliper of dirt, then install the new high-quality pads; reassemble the brake caliper, following the video tutorial to the end!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Gsxr 600 .. the front brake pads on the 2012 Suzuki GSX-R 600. First, remove the front brake calipers; to do this, unscrew the two fixing screws of the caliper.. …
Gsxr 600 .. and replace the rear brake pads on a Suzuki GSX-R 600 K7, following these simple steps. First, loosen the two screws securing the rear brake caliper.. …
Gsxr 600 .. Replacing the battery of the Suzuki GSX-R 600, as well as the GSX-R 750, is a task that takes just a few minutes and a simple socket spanner... …

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos