Do it yourself
Frequently asked questions about cars and motorcycles
For this motorcycle model, it is recommended to use 10W-40 oil. To change the oil, first remove the right fairing by unscrewing all the screws securing it as shown in the video. Unscrew and clean the drain bolt, now exposed, with a 17mm socket, and collect the used oil in a container. Unscrew the oil filter, from which some lubricant will still flow, and screw in the new one. Close the drain hole and reattach the fairing. Finally, refill with the same amount of oil that drained from the upper hole. It is advisable to perform the oil change with the engine warm.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Gsxr 600 Before you can start, sit on the seat of your Suzuki GSXR 600. Begin by inserting the key into the ignition switch and turning it clockwise. Next, pu…
Gsxr 600 To change the engine oil on the Suzuki GSXR 600, loosen the drain plug located at the bottom centre of the vehicle: once this is unscrewed, you can c…
Gsxr 600 Before you begin, it is advisable to position your Suzuki GSXR 600 vertically for easier access to the seat. Start by removing the side covers around…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos