Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant on a Suzuki SV 650

Model: Suzuki Sv 650
Part: Antifreeze coolant

Video tutorial

In today's video, learn how to bleed and replace the coolant on a Suzuki SV 650 motorcycle. First, bleed the cooling system by removing the antifreeze; then remove the drain screw located on the water pump, as shown in the video.

Once drained into a container, pour in the new coolant of the correct type by opening the radiator cap; fill it up to the maximum level indicated by a mark on the expansion tank (it is important not to exceed the maximum level)!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Sv 650 To replace the radiator on a Suzuki SV650, disconnect all connectors and hoses attached to it, accessing from the sides of the bike. Next, position a…
Sv 650 To replace the spark plug on a Suzuki SV 650, disconnect the coil located at the top of the engine block: the coil can be found immediately behind th…
Sv 650 In this tutorial, you will see how to replace the engine oil in the Suzuki SV 650, an extremely simple and quick operation. First, wait for the engin…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos