Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will learn how to change the bulb on a Suzuki V-Strom 650, a task that is not difficult but is done quite differently compared to other bikes. Unscrew the screws located at the bottom of the front headlamp of your Suzuki. Next, unscrew the screws on the top, between the fuel tank and the handlebars, as shown in the video. Remove the part containing the speedometer and disconnect its connectors. At this point, it will be easy to unscrew the cover behind the headlamp and extract the bulb. Insert the new part you purchased and reassemble everything in reverse order.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the bulb of the Suzuki V-Strom 650.
How to replace the bulb of the Suzuki V-Strom 650.
V Storm 650 Replacing the bulb of the Suzuki V Storm 650 is a simple and quick task that can be done independently. To replace the bulb, we need to unscrew the p…
Engine Oil Change for the Suzuki V Storm 650
Engine Oil Change for the Suzuki V Storm 650
V Storm 650 This guide shows you how to perform a service by changing the engine oil and oil filter on the Suzuki V Storm 650. First, place the motorcycle on the…
How to set the time on the Suzuki V-Storm 650
How to set the time on the Suzuki V-Storm 650
V Storm 650 Today's instructions will show us the process of how to change the time on the display of the instrument panel of the Suzuki V-Storm 650 motorcycle. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos