Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Suzuki V-Storm 650

Model: Suzuki V Storm 650
Part: Clock

Video tutorial

Today's instructions will show you how to change the time on the display of the instrument panel of the Suzuki V-Storm 650. First, place the motorcycle on the centre stand and turn on the instrument panel by turning the key to position one; then press and hold the two buttons on the instrument panel until the minutes start to flash, as shown in the video.

At this point, adjust the minutes with the single button, then set the hour, finally exiting the settings menu to save your changes!


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Suzuki V-Storm 650
How to Set the Time on the Suzuki V-Storm 650
V Storm 650 Here are the instructions to set the time on the Suzuki V-Storm instrument panel by following these simple steps. First, place the motorcycle on its …
How to change the time on the Suzuki V Storm 650
V Storm 650 .. will see how to change the time on the Suzuki V Storm 650. The procedure takes little time to be carried out and no tools or software are needed. First,.. …
Replacing the Bulb on a Suzuki V-Strom 650
Replacing the Bulb on a Suzuki V-Strom 650
V Storm 650 Today, you will learn how to change the bulb on a Suzuki V-Strom 650, a task that is not difficult but is done quite differently compared to other bi…

Battery Replacement for the Ducati Monster 796

Let's see how to proceed with replacing the battery on a Ducati Monster 796. Open and remove the seat, unscrew the screws securing the flange around the fuel tank cap and those securing the two half-shells covering the tank, and remove everything. Unscrew and remove the plastic panel under the seat to also unscrew the screw fixing the tank. On the left side, you will find a bolt securing the tank to the frame; unscrew this as well to be able to slide and lift the tank from its position after disconnecting and temporarily sealing the fuel vapour breather hose. This gives you access to the battery; disconnect the terminals from the poles and unclip the securing strap, remove the old battery and replace it with a new one. Reattach the terminals, ensuring the correct polarity, secure the strap, and reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos