Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki V Storm 650
Part: Wheel

To replace the front wheel on the Suzuki V-Strom 650, first loosen the bolts securing the brake caliper to the disc so it can be completely detached. Once the caliper is removed, loosen the nut that secures the wheel's central axle and holds it in place at the fork base; this will allow you to fully extract the old wheel from its housing and replace it with a new one. Refit the new wheel by inserting the axle, tightening the corresponding nut, and reattaching the brake caliper to its disc.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Wheel of the Suzuki V-Strom 650
How to Remove the Front Wheel of the Suzuki V-Strom 650
V Storm 650 .. To remove the front wheel of the Suzuki V-Strom 650, unscrew the side nuts that secure the central axle of the wheel so that it can be completely.. …
How to Replace the Exhaust on a Suzuki V-Strom 650?
How to Replace the Exhaust on a Suzuki V-Strom 650?
V Storm 650 .. To replace the exhaust on a Suzuki V-Strom 650, loosen the screws that secure the exhaust end can to its housing, allowing it to be freed.. …
How to Replace the Headlight Bulb on a Suzuki V-Strom 650
How to Replace the Headlight Bulb on a Suzuki V-Strom 650
V Storm 650 .. To replace the headlight bulb on the Suzuki V-Strom 650, you need to remove the front fairing, which contains the motorcycle's instrument panel. To.. …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos