Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. :
  3. Burgman 400
    4. : How do you replace the rear brake pads on the Suzuki Burgman 400 K7?

Model: Suzuki Burgman 400
Part: Brake pads
How do you replace the rear brake pads on the Suzuki Burgman 400 K7?

To replace the rear brake pads in the Suzuki Burgman 400 K7 maxiscooter (i.e. the model produced in 2007) you must first remove the brake caliper. This can be done by loosening the clamping screws before pulling the caliper off. Once the caliper has been extracted from its seat, we can proceed to remove the worn pads and insert the new ones, fixing them carefully. Let's put the caliper back in place and make sure everything is working properly. Important: Always test the function of the brakes after replacing the brake pads and before setting off!


Posted on 29 October 2022 by ScegliAuto



How to replace the rear brake pads on Suzuki Burgman 400?
Burgman 400 In order to replace the Suzuki Burgman 400 pads you need to loosen the screws that secure the brake caliper to its housing on the disc. Once the scre
How to replace brake fluid on Suzuki Burgman 400
Burgman 400 We see in this video the instructions necessary to replace the rear brake fluid on the Suzuki Burgman 400 scooter, in simple steps. First of all, let
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following

How to get a service on the Piaggio Beverly 350

In today's video you will see how to carry out an operation in full autonomy in the Piaggio Beverly. In fact, you will see how to carry out the complete service in your box. We recommend following the timing and types of products recommended by the parent company. Then remember to proceed with the cold vehicle and parked on the central stand. Then insert a drip tray under the scooter and open the vent cap; drain all the oil. Also remove the used filter. Then you can proceed to reinsert the new filter and engine oil in the correct quantity.

Watch the video!


by ScegliAuto

More videos