Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's information will show us the process of disassembling and replacing the rear brake pads of the Suzuki Burgman 400 scooter. First, we put the scooter on the center stand and start disassembling and removing the brake caliper from the disc, unscrewing the fixing screws; now we press on the caliper piston to retract it, thus removing the brake pads. At this point, we clean the caliper from any residual dirt, then install the new original pads; we then apply the reverse process for reassembly!

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on the Suzuki Burgman 400 K7?
How to Replace the Rear Brake Pads on the Suzuki Burgman 400 K7?
Burgman 400 To replace the rear brake pads on the Suzuki Burgman 400 K7 (the model produced in 2007), first remove the brake caliper. This can be done by looseni…
How to Replace the Rear Brake Pads on a Suzuki Burgman 400
How to Replace the Rear Brake Pads on a Suzuki Burgman 400
Burgman 400 To replace the brake pads on the Suzuki Burgman 400, loosen the bolts securing the brake caliper to its housing on the disc. Once the bolts are loose…
How to reset the oil light on the Suzuki Burgman 400
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos