Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Wheel of a Suzuki GSR 600

Model: Suzuki Gsr 600
Part: Wheel

Video tutorial

This guide provides instructions on how to remove and replace the rear wheel or tyre of a Suzuki GSR 600, following these simple steps. First, place your bike on a stand and begin unscrewing the central wheel spindle using a socket with an extension; then remove the drive chain, as shown in the video.

At this point, remove the wheel and, if necessary, replace the rear tyre; then reassemble the wheel, fitting the chain and adjusting it, following the video tutorial to the end!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Replacing the Brake and Clutch Levers on a Suzuki GSR 600
Replacing the Brake and Clutch Levers on a Suzuki GSR 600
Gsr 600 In today's video, you will find instructions to disassemble and replace the brake and clutch levers on a Suzuki GSR 600 motorcycle. First, remove the…
Replacement of the cooling liquid of the Suzuki GSR 600
Replacement of the cooling liquid of the Suzuki GSR 600
Gsr 600 The instructions provided in this guide will show us how to replace the coolant or antifreeze of the Suzuki GSR 600. First, we put the motorcycle on …
Replacing the Air Filter on the Suzuki GSR 600
Replacing the Air Filter on the Suzuki GSR 600
Gsr 600 In this video, see how to remove and replace the engine air filter on the Suzuki GSR 600 motorcycle by following these simple and quick steps. First,…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos