Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Burgman 400
Part:

Today's steps will show you how to dismantle and replace the drive belt on the Suzuki Burgman 400 scooter. First, place the scooter on the centre stand and start unscrewing the fixing screws of the left side chain to remove it. Then unscrew the additional screws of the side cover and remove the fan plate, as shown in the video. At this point, remove the fan and, if necessary, the clutch bell, then replace the belt with a new one. Reassemble your transmission!

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the drive belt of the Suzuki Burgman 400
How to replace the drive belt of the Suzuki Burgman 400
Burgman 400 In this guide we will see the instructions that will allow us to disassemble and replace the transmission belt of the Suzuki Burgman 400 scooter. Fir…
How to Replace the Drive Belt on the Suzuki Burgman 400 Scooter?
How to Replace the Drive Belt on the Suzuki Burgman 400 Scooter?
Burgman 400 In this tutorial, you will see how to replace the drive belt on the Suzuki Burgman 400 scooter, a part of regular maintenance. First, ensure the engi…
How do you replace the transmission of the Suzuki Burgman 400?
How do you replace the transmission of the Suzuki Burgman 400?
Burgman 400 To replace the transmission of the Suzuki Burgman 400, you need to loosen the screws that secure the transmission cover located near the rear wheel, …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos