Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Drive Belt on the Suzuki Burgman 400 Scooter?

Model: Suzuki Burgman 400
Part:

Video tutorial

In this tutorial, you will see how to replace the drive belt on the Suzuki Burgman 400 scooter, a part of regular maintenance. First, ensure the engine is sufficiently cool.

Then, remove the three screws to take off the plastic cover of the transmission casing. Next, open the casing by unscrewing the ten bolts, remove the clutch pulley retaining nut, and take out the old belt.

Now, position the new belt and follow the reverse procedure to reassemble everything.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

How to Replace the Drive Belt on a Suzuki Burgman 400
How to Replace the Drive Belt on a Suzuki Burgman 400
Burgman 400 Today's steps will show you how to dismantle and replace the drive belt on the Suzuki Burgman 400 scooter. First, place the scooter on the centre sta…
How to replace the drive belt of the Suzuki Burgman 400
How to replace the drive belt of the Suzuki Burgman 400
Burgman 400 In this guide we will see the instructions that will allow us to disassemble and replace the transmission belt of the Suzuki Burgman 400 scooter. Fir…
How to Remove the Belt, Variator, and Clutch on a Suzuki Burgman 400
How to Remove the Belt, Variator, and Clutch on a Suzuki Burgman 400
Burgman 400 In this video, you will see the steps to remove the belt, variator, and clutch on a Suzuki Burgman 400 scooter. First, position the scooter on the ce…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos