Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Burgman 400
Part: Wheel

Below are the instructions that will allow you to remove and replace the rear wheel of the Suzuki Burgman 400, following these simple steps. First, place the scooter on the centre stand and start removing the right side plastic fairing; then unscrew the fixing screws of the exhaust silencer, removing it from the collector, as shown in the video. At this point, unscrew the screws of the rear brake caliper, removing it from the disc; all that remains is to unscrew the central bolt of the wheel, slide it off, and replace the tyre if necessary!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Transmission Oil on a Suzuki Burgman 400
How to Change the Transmission Oil on a Suzuki Burgman 400
Burgman 400 To change the transmission oil on a Suzuki Burgman 400, you need to unscrew the screws securing the transmission cover, located near the rear wheel o…
How to Replace the Transmission on a Suzuki Burgman 400?
How to Replace the Transmission on a Suzuki Burgman 400?
Burgman 400 To replace the transmission on the Suzuki Burgman 400, loosen the screws securing the cover on the left side of the bike, near the rear wheel. Once t…
How to Replace the Clutch on a Suzuki Burgman 400?
How to Replace the Clutch on a Suzuki Burgman 400?
Burgman 400 To replace the clutch on a Suzuki Burgman 400, loosen the screws securing the cover near the rear wheel on the left side of the bike. Once the bolts …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos