Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Find and Reset Average Speed and Trip Information on a Suzuki SX4 MK2

Model: Suzuki Sx4 JY, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to reset and then set the average speed and trip information on a Suzuki SX4 MK2. You can find this information on the display located at the centre of the instrument cluster, between the speedometer and the rev counter. On the left side of the dial, there is a small button that, when pressed, allows you to switch between trip "A" and trip "B". Choose the one you are interested in, and to reset it, simply hold down the knob.

This way, you can clear the selected trip; you will reset not only the miles travelled but also the average speed maintained during the trip.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Resetting the service light indicator on the Suzuki SX4.
Resetting the service light indicator on the Suzuki SX4.
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Below are the instructions on how to reset the service light for the regular maintenance of the engine oil change on the Suzuki SX4. First, get in th…
How to reset the tire pressure on Suzuki SX4
How to reset the tire pressure on Suzuki SX4
Suzuki Sx4 (2013-2021 / JY, MK 2) To reset the tire pressure on the Suzuki SX4, you can follow these general steps. Turn on the car: make sure all tires are inflated to the correct pr…
What is the fuse diagram for the Suzuki SX4?
What is the fuse diagram for the Suzuki SX4?
Suzuki Sx4 (2013-2021 / JY, MK 2) In this video we can see where the fuse boxes of the Suzuki SX4 are located and what the respective diagrams are, useful in case we need to check the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos