Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door panel of the Suzuki Ignis

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Door trim panel

Today's steps will show us how to disassemble and replace the rear door panel of the Suzuki Ignis, following these simple instructions. First, we open the rear door of the car and start by removing the window handle and unscrewing all the fixing screws found on the sides of the door panel; then we gently detach the panel from the sides until it is completely removed, as shown in the video. At this point, we replace the door panel or its internal components if necessary, applying the reverse process for reassembly!

Posted on 20 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel on a Suzuki Ignis
How to remove the door panel on a Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) The removal of the door panel on a Suzuki Ignis vehicle requires little time and the use of a Phillips screwdriver and a plastic lever tool. Let's st…
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…
How to Replace the Key Battery on the Suzuki Ignis 3
How to Replace the Key Battery on the Suzuki Ignis 3
Suzuki Ignis (2016-2024 / MK 3) If the smart key for your Suzuki Ignis third series (2016-2022) has suddenly stopped working, do not worry as you can quickly and safely resolve this…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos