Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the door panel on a Suzuki Ignis

Model: Suzuki Ignis MK 2 - Years 2003-2008
Part: Door trim panel

The removal of the door panel on a Suzuki Ignis vehicle requires little time and the use of a Phillips screwdriver and a plastic lever tool. Let's start by removing the window handle by pulling it outwards. Immediately after, using the plastic tool, we remove the opening handle and with the use of the screwdriver, we unscrew the central screws behind the closing handle. Then we unscrew the screw behind the opening handle and then the side screws, finally we remove the panel and disconnect the connector. To perform the assembly, you will need to follow the same steps in reverse.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Ignis (2003-2008 / MK 2) Today's steps will show us how to disassemble and replace the rear door panel of the Suzuki Ignis, following these simple instructions. First, we ope…
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…
Suzuki Ignis (2016-2024 / MK 3) Before starting, sit in the driver's seat of your Suzuki Ignis. Begin by activating the instrument panel by turning the ignition key in the lock, wit…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos