Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Ignis
    4. : Door trim panel

Suzuki Ignis - Door trim panel

Door Trim Panel Suzuki Ignis (2003-2008 / mk 2)

Suzuki Ignis (2003-2008 / MK 2)
How to disassemble the rear door panel of the Suzuki Ignis
Today's steps will show us how to disassemble and replace the rear door panel of the Suzuki Ignis, following these simple instructions. First, we open the rear …Read all…
Posted on 20 September 2024 by ScegliAuto
Suzuki Ignis (2003-2008 / MK 2)
How to remove the door panel on a Suzuki Ignis
The removal of the door panel on a Suzuki Ignis vehicle requires little time and the use of a Phillips screwdriver and a plastic lever tool. Let's start by …Read all…
Posted on 19 July 2024 by ScegliAuto
Suzuki Ignis (2003-2008 / MK 2)
Removing the door panel on Suzuki Ignis
Using a plastic wedge (you can also use a small flat screwdriver, but be careful not to scratch the plastics), remove the two covers on the internal handle of …Read all…
Posted on 22 May 2026 by ScegliAuto
Antenna (2) Car stereo (2) Battery (2) Spark plugs (2) Body (1) Key (17) Timing belt (2) Onboard computer (8) Checks and maintenance (4) Bearing (1) Fog lights (1) Diesel particulate filter (1) Air filter (3) Cabin air filter (7) Oil filter (1) Parking brake (1) Clutch (1) Accessory kit (1) Side marker bulb (2) Headlight bulb (2) Tail light bulb (2) Handle (1) Engine oil (4) Clock (39) Door trim panel (3) Windshield (1) Brake pads (2) Shift knob (2) Instrument cluster (3) Fuse box (8) Warning light – error code (6) (3) Tire pressure warning light (4) Service warning light (31)

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos