Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door panel on Suzuki Ignis

Model: Suzuki Ignis MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

See other generations:
Video tutorial

Using a plastic wedge (you can also use a small flat screwdriver, but be careful not to scratch the plastics), remove the two covers on the internal handle of the door and unscrew the two cross-head screws underneath. Once the handle is removed, also unscrew the screw next to the opening handle and remove it. Finally, remove the small side cover, accessible only by opening the door, and detach the plastic around the external mirror.

Extract the panel by prying with the wedge first at the bottom and then in the side gaps.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Suzuki Ignis
How to Remove the Rear Door Panel of a Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) Today’s steps will show you how to remove and replace the rear door panel of a Suzuki Ignis by following these simple instructions. First, open the r…
How to Remove the Door Panel on a Suzuki Ignis
How to Remove the Door Panel on a Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) Removing the door panel on a Suzuki Ignis takes little time and requires a star screwdriver and a plastic prying tool. Start by removing the window l…
How to Reset the Tyre Pressure Light on a Suzuki Ignis?
How to Reset the Tyre Pressure Light on a Suzuki Ignis?
Suzuki Ignis (2003-2008 / MK 2) To turn off the tyre pressure light on a Suzuki Ignis, insert a device capable of checking tyre pressure into the cigarette lighter socket. Once inse…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos