Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Ignis
    4. : How to disassemble the Suzuki Ignis car stereo

Suzuki Ignis - Video tutorial

Model: Suzuki Ignis MK 3 - Years 2016-2024
Part: Car stereo
Operation: How to disassemble the Suzuki Ignis car stereo

How to disassemble the original Suzuki Ignis car stereo. First of all, with a plastic lever, remove the lower covering of the car radio and the upper one as in the video, then, with the help of a screwdriver, we go to unscrew the tightening screws placed on the sides of the same. After having unscrewed the lateral fastening screws of the stereo, extract the same from its seat (remove the tightening clips placed in the plastic of the stereo), disconnect the various power supply terminals placed in the rear part of the same and the reception cable of the stereo. antenna. To reassemble the various disassembled pieces, let's go backwards.


Posted on 16 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Ignis 2016-2024 - Why isn't the Suzuki Ignis car radio working? Read Answer
    • Ignis 2003-2008 - Where is the Suzuki Ignis radio security code located? Read Answer
    • Ignis 2016-2024 - How do you get the Suzuki Ignis radio unlock code? Read Answer
    • Ignis 2016-2024 - Why does the Suzuki Ignis 2022 car radio not work? Read Answer
    • Ignis 2003-2008 - How to unlock Suzuki Ignis car stereo? Read Answer
    • Ignis 2016-2024 - What is the unlock code of the Suzuki Ignis car radio? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos