Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio on Suzuki Ignis

Model: Suzuki Ignis MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Car stereo

See other generations:
Video tutorial

This tutorial shows you how to remove the radio from a Suzuki Ignis. First, get into the vehicle and grab a cross-head screwdriver: unscrew the two upper screws of the radio.

Then, remove the ashtray to locate the other screws of the radio bracket. Unscrew these screws (three in total) and finally, remove the side trim by unclipping it. Pull the radio out and disconnect its connector to complete the job! Proceed with the correct installation afterwards.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Find and Enter the Radio Code for the Suzuki Ignis
How to Find and Enter the Radio Code for the Suzuki Ignis
Suzuki Ignis (2003-2008 / MK 2) Today's instructions will show you how to find and enter the radio code for the Suzuki Ignis, following these simple steps. First, locate the radio c…
How to Set the Time on a Suzuki Ignis
How to Set the Time on a Suzuki Ignis
Suzuki Ignis (2016-2024 / MK 3) Before starting, sit in the driver's seat of your Suzuki Ignis. Begin by activating the instrument panel by turning the ignition key in the lock, wit…
Where to Find the OBD Port on the Suzuki Ignis 2000
Where to Find the OBD Port on the Suzuki Ignis 2000
Suzuki Ignis (2000-2003 / MK 1) Thanks to the steps described in the following guide, you will be able to locate the OBD port inside your Suzuki Ignis (2000 model) in just a few sec…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos