Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the light of the internal ceiling light of a Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Interior dome light bulb

In this video, we will see how to change the bulb in the ceiling light of a Suzuki Swift, perhaps replacing it with an LED: we will need a small flathead screwdriver - or even better a small plastic spatula, so we can be sure not to scratch anything - to pry open one of the notches located under the transparent part of the ceiling light, so we can lift it up and then remove it. Using the same tool, we remove the bulb and replace it with a 5W canbus LED, which will give us a nice white light and will not give an error on the dashboard. Simply replace it as we would have done with a normal bulb and put the transparent part back in place.

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on Suzuki Swift
How to Remove the Rear Light on Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) Is the rear light on your Suzuki Swift damaged? Let's see how to replace it. Open the boot lid, unscrew the securing screws located on the side above…
How to replace the license plate lights of the Suzuki Swift
How to replace the license plate lights of the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) Following these brief and simple instructions, we will see how to disassemble and replace the license plate bulbs of the Suzuki Swift. First, open th…
How to Remove the Rear Light on a Suzuki Swift?
How to Remove the Rear Light on a Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) To remove the rear light on a Suzuki Swift, open the boot lid and loosen the bolts located between the seal and the light itself. Once these are remo…

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos