Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port located in the Suzuki Swift?

Model: Suzuki Swift MK 4, Rs41 - Years 2004-2010
Part: Dashboard

If you want to connect a diagnostic tool to your Suzuki Swift to identify and resolve any electronic errors, but you don't know where the OBD port is located, then you just have to carefully read the following guide and put into practice what is described. First, enter the vehicle from the driver's side and make sure the car is turned off. At this point, remove the entire plastic panel located below the steering wheel and then locate the OBD port you were looking for. Finally, use a compatible cable to connect the diagnostic tool to it.

Posted on 15 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the OBD Port on the Suzuki Swift 4
Where to Find the OBD Port on the Suzuki Swift 4
Suzuki Swift (2004-2010 / MK 4, Rs41) If you want to connect a professional diagnostic tool to your Suzuki Swift Mk4 (year 2004-2010) but do not know where the OBD port is located, just r…
Where is the OBD port of the Suzuki Swift 2025 located?
Where is the OBD port of the Suzuki Swift 2025 located?
Suzuki Swift (2024-2026 / MK 4) If you do not yet know where the OBD port is located inside your new Suzuki Swift (year 2025), do not worry because in the following guide you will f…
Where is the OBD port located in the 2019 Suzuki Swift?
Where is the OBD port located in the 2019 Suzuki Swift?
Suzuki Swift (2017-2024 / MK 6, A2L) If you are planning to perform a diagnostic analysis on the ECU of your 2019 Suzuki Swift, but you do not know where the OBD port of the car is locat…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos