Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing chain of the Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Timing belt

See other generations:
Video tutorial

In these brief steps, let's see how to disassemble and replace the timing chain of the Suzuki SX4, as well as the Fiat Sedici. First, open the hood and start by removing the serpentine belt and the valve cover, unscrewing all the fixing screws and disconnecting the various pipes; then lift the vehicle to remove the crankshaft pulley, also removing the distribution cover, as shown in the video.

At this point, take the necessary references for the replacement of the timing chain, installing the original one accordingly; replace if necessary the water pump kit and the main distribution elements.


Posted on 12 May 2025 by ScegliAuto


Related tutorials

How to Replace the Timing Chain in the Suzuki SX4
How to Replace the Timing Chain in the Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To replace the timing chain in the Suzuki SX4, loosen the bolts securing the front right wheel to allow for its removal. Once the wheel is off, proce…
How to Replace the Timing Chain on a Suzuki SX-4
How to Replace the Timing Chain on a Suzuki SX-4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To replace the timing chain on a Suzuki SX-4, open the bonnet to access the left side of the engine block: here, you will need to loosen the screws s…
What is the replacement interval for the timing belt on the Suzuki Sx4
What is the replacement interval for the timing belt on the Suzuki Sx4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) The timing belt is a toothed rubber strip that transmits the movement from the crankshaft to the camshafts, which control the opening and closing of …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos