Do it yourself
| ||||
|
Suzuki Samurai - Video tutorial
Model: Suzuki Samurai
JA, JB, Sj40, Sj30
- Years 1989-2003 Today's guide will show us how to dismantle and replace the engine oil pump of the Suzuki Samurai, as well as the Jimny. In this case, the oil pump has already been removed from the vehicle after draining the oil and removing the timing belt; this will allow us to remove the oil pump housing. At this point, we will dismantle the internal gear of the pump, replacing it if necessary with a new one; we will use a feeler gauge to measure the internal tolerances of the pump, then assemble all its components and reassemble everything!
Posted on 27 December 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |