Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Suzuki Samurai

Model: Suzuki Samurai JB, JA, Sj40, Sj30 - Years 1989-2003
Part: Timing belt

The following steps will show us how to disassemble and replace the timing belt of the Suzuki Samurai, following the instructions below. First, open the hood of the car and start disassembling and removing the cooling radiator, disconnecting the pipes and unscrewing the fixing screws; this way it will be possible to access the timing belt, which is located on the front part of the engine block, by removing the timing belt cover. At this point, take note of the necessary references for the replacement of the belt, following the video tutorial until the end!

Posted on 5 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Tensioner on a Suzuki Samurai
How to Remove the Tensioner on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) If you have reached this page, you probably intend to replace the timing belt on your Suzuki. Don't worry, I will explain how to do it step by step. …
How to Replace the Engine Oil Pump on a Suzuki Samurai
How to Replace the Engine Oil Pump on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) This guide shows you how to dismantle and replace the engine oil pump on a Suzuki Samurai, as well as on a Jimny. In this case, the oil pump has alre…
Replacing the Key Battery on a Suzuki Samurai
Replacing the Key Battery on a Suzuki Samurai
Suzuki Samurai (1989-2003 / JB, JA, Sj40, Sj30) Removing the key barrel from a Suzuki Samurai and replacing its battery is very simple, and we will demonstrate it now. You will need a small cross-h…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos