Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cooling Radiator on a Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Radiator

Below is the procedure for removing and replacing the engine cooling radiator on the Suzuki Jimny. First, open the bonnet and start disconnecting the coolant hose, allowing the fluid to drain into a container; then disconnect the upper hoses and unscrew the radiator fan screws, disconnecting the electrical connector to remove it. At this point, unscrew the radiator screws and remove it as well; replace the component with the new original one, reassemble the fan, and top up with new antifreeze.

Posted on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Heating Radiator of the Suzuki Jimny
Guide to Removing the Heating Radiator of the Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Follow this guide to remove the heating radiator from the cabin of the Suzuki Jimny. First, get inside the vehicle and start by removing the entire d…
How to replace the coolant in a Suzuki Jimny
How to replace the coolant in a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) This video guide shows how to replace the coolant in a first-generation Suzuki Jimny, produced approximately from 1998 to 2018. The operation is very…
How to Remove the Water Radiator from a Suzuki Jimny
How to Remove the Water Radiator from a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Need to replace the car radiator? Here’s how to remove it from inside the engine bay of the Jimny. To remove the radiator, you must take off the fron…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos