Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Heating Radiator of the Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Heater core

Follow this guide to remove the heating radiator from the cabin of the Suzuki Jimny. First, get inside the vehicle and start by removing the entire dashboard. Unscrew all the fixing screws and disconnect the electrical connectors, removing the central instrumentation and the steering wheel. Next, remove the entire dashboard plastic to access the heating radiator located just behind it. Disconnect the coolant circuit and replace the cabin heating radiator!

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cooling Radiator on a Suzuki Jimny
How to Replace the Cooling Radiator on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Below is the procedure for removing and replacing the engine cooling radiator on the Suzuki Jimny. First, open the bonnet and start disconnecting the…
How to replace the coolant in a Suzuki Jimny
How to replace the coolant in a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) This video guide shows how to replace the coolant in a first-generation Suzuki Jimny, produced approximately from 1998 to 2018. The operation is very…
How to Remove the Water Radiator from a Suzuki Jimny
How to Remove the Water Radiator from a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Need to replace the car radiator? Here’s how to remove it from inside the engine bay of the Jimny. To remove the radiator, you must take off the fron…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos