Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard Removal in 2 Minutes

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Dashboard

Removing the dashboard can be very useful in various cases, such as restoring non-functioning lighting, replacing a button, or carrying out a general repair.
The video shows the entire dashboard frame disassembled, allowing you to orient the piece in various positions to align the holes and clips, giving you a better understanding of the work ahead.
First, unscrew the screws in the ashtray area, then proceed to unclip the fasteners visible in the images along the length of the trim on both sides. At this point, pull the piece towards you, and before fully removing it, be careful to disconnect the cigarette lighter cable.
The various buttons, including the hazard button, remain attached to the rest of the dashboard, and without the cover we have removed, you can remove them for potential replacement.

Updated on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Instrument Cluster on a Suzuki Jimny
Dismantling the Instrument Cluster on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) In this guide, you will find instructions for dismantling the instrument cluster on a Suzuki Jimny. First, get inside the vehicle and start by removi…
How to set the time on the instrument panel of the Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) Following these short and simple instructions, we will see how to change the time on the display of the instrument panel of the Suzuki Jimny. First o…
How to Set the Time on a Suzuki Jimny
How to Set the Time on a Suzuki Jimny
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) In this video tutorial, we will see how to adjust the time on the Suzuki Jimny by following these simple and quick steps. First, get in the vehicle a…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos