Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling the Centre Console on a Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Dashboard

In today's video tutorial, you will see the main instructions for disassembling the central instrumentation of a first-generation Suzuki Jimny. First, get inside the vehicle and remove the ashtray; then pry on the sides with something thin to remove the plastic trim of the instrumentation, disconnecting the electrical connectors at the back. At this point, remove the car radio by unscrewing the fixing screws and disconnecting the electrical connector; finally, also remove the air conditioning controls by unscrewing the fixing screws!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Heating Radiator of the Suzuki Jimny
Guide to Removing the Heating Radiator of the Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Follow this guide to remove the heating radiator from the cabin of the Suzuki Jimny. First, get inside the vehicle and start by removing the entire d…
Dismantling the Instrument Cluster on a Suzuki Jimny
Dismantling the Instrument Cluster on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) In this guide, you will find instructions for dismantling the instrument cluster on a Suzuki Jimny. First, get inside the vehicle and start by removi…
Instructions for Disassembling Rear Brakes on Suzuki Jimny
Instructions for Disassembling Rear Brakes on Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) In today's video, you will see the main instructions for disassembling and replacing the rear drum brakes on a Suzuki Jimny. First, raise the vehicle…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos