Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Disassembling Rear Brakes on Suzuki Jimny

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Brake pads

In today's video, you will see the main instructions for disassembling and replacing the rear drum brakes on a Suzuki Jimny. First, raise the vehicle and remove the rear wheel: then, remove the drum and use pliers to detach the spring holding the brake shoes: before doing this, remove the retaining pin (a clip) that secures the shoes. At this point, remove the brake shoes and replace them with new ones, cleaning the area of any carbon residue first; correctly insert the piston between the shoes and reassemble everything, applying the reverse procedure!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Instrument Cluster on a Suzuki Jimny
Dismantling the Instrument Cluster on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) In this guide, you will find instructions for dismantling the instrument cluster on a Suzuki Jimny. First, get inside the vehicle and start by removi…
Removing Rear Seats from Suzuki Jimny
Removing Rear Seats from Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Today, you will see the main steps to remove the rear seats from a Suzuki Jimny. First, open the tailgate and grab a crosshead screwdriver to unscrew…
How to Replace the Auxiliary Belt on a Suzuki Jimny
How to Replace the Auxiliary Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos