Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in a Suzuki Jimny

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Antifreeze coolant

See other generations:
Video tutorial

This video guide shows how to replace the coolant in a first-generation Suzuki Jimny, produced approximately from 1998 to 2018. The operation is very simple, and you can do it yourself. First, position a container under the radiator tap, then unscrew the tap and allow all the old coolant to drain into the container.

Once done, close the tap. Now add the new coolant into the radiator until full, start the engine to circulate the coolant, and finally top up as necessary.


Updated on 1 July 2026 by ScegliAuto


Related tutorials

How to replace the thermostat in the Suzuki Jimny?
How to replace the thermostat in the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) In this tutorial, we can see how to replace the thermostat in the Suzuki Jimny, a very simple and quick operation. First of all, make sure that the e…
Where is the Thermostat Located on the Suzuki Jimny?
Where is the Thermostat Located on the Suzuki Jimny?
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) This video shows where the thermostat is located on the Suzuki Jimny, useful if you need to replace it due to a fault. As shown, the thermostat is po…
Replacement of the thermostat for the Suzuki Jimny 1.3
Replacement of the thermostat for the Suzuki Jimny 1.3
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) The instructions in this guide will show us how to disassemble and replace the thermostat of the Suzuki Jimny 1.3. First, we open the hood of the car…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos