Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the thermostat for the Suzuki Jimny 1.3

Model: Suzuki Jimny Jb43, Jb53, Jb33, Jb23 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Thermostat

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the thermostat of the Suzuki Jimny 1.3. First, we open the hood of the car and start by disconnecting the coolant pipe, letting it drain into a container; then we disconnect the air intake hose and unscrew the thermostat screws to detach and remove it, as shown in the video.

At this point, we replace the component with the new one, as well as with the original one; then we reassemble all the other components and top up the new antifreeze liquid!


Posted on 19 July 2025 by ScegliAuto


Related tutorials

Where is the Thermostat Located on the Suzuki Jimny?
Where is the Thermostat Located on the Suzuki Jimny?
Suzuki Jimny (2018-2026 / Jb74w, Jb64w) This video shows where the thermostat is located on the Suzuki Jimny, useful if you need to replace it due to a fault. As shown, the thermostat is po…
How to replace the thermostat in the Suzuki Jimny?
How to replace the thermostat in the Suzuki Jimny?
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) In this tutorial, we can see how to replace the thermostat in the Suzuki Jimny, a very simple and quick operation. First of all, make sure that the e…
How to Replace the Auxiliary Belt on a Suzuki Jimny
How to Replace the Auxiliary Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb43, Jb53, Jb33, Jb23) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos