Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the thermostat in the Suzuki Jimny?

Model: Suzuki Jimny Jb23, Jb33, Jb43, Jb53 - Years 1998-2018
Part: Thermostat

In this tutorial, we can see how to replace the thermostat in the Suzuki Jimny, a very simple and quick operation. First of all, make sure that the engine is completely cold, in order to operate safely. Then, open the hood and remove the connecting duct between the air filter and the throttle body. Disconnect the indicated tube by releasing the corresponding clamp, being careful not to let too much coolant spill out. Unscrew the two bolts of the thermostat housing and remove it. At this point, all that remains is to insert the replacement, reassemble everything following the reverse procedure, and top up the coolant.

Posted on 13 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the Thermostat Located on the Suzuki Jimny?
Where is the Thermostat Located on the Suzuki Jimny?
Suzuki Jimny (2018-2026 / Jb64w, Jb74w) This video shows where the thermostat is located on the Suzuki Jimny, useful if you need to replace it due to a fault. As shown, the thermostat is po…
Replacement of the thermostat for the Suzuki Jimny 1.3
Replacement of the thermostat for the Suzuki Jimny 1.3
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) The instructions in this guide will show us how to disassemble and replace the thermostat of the Suzuki Jimny 1.3. First, we open the hood of the car…
How to Replace the Auxiliary Belt on a Suzuki Jimny
How to Replace the Auxiliary Belt on a Suzuki Jimny
Suzuki Jimny (1998-2018 / Jb23, Jb33, Jb43, Jb53) Before you can start, open the bonnet of your Suzuki Jimny. Begin by loosening the tensioner by slightly unscrewing the fixing bolt. This will free t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos